Digital Centre Mirror (if equipped)
The Digital Centre Mirror is a system that uses the camera on the rear of the vehicle and displays its image on the screen of the Digital Centre Mirror. The Digital Centre Mirror allows the driver to see the rear view despite obstructions, such as the headrest or luggage, ensuring rear visibility.
Failure to follow the warnings and instructions for proper use of the Digital Centre Mirror could result in serious accident.
-
The Digital Centre Mirror is a convenience feature but it is not a substitute for proper vehicle operation. The system has areas where objects cannot be viewed. Check the blind spot of the Digital Centre Mirror before vehicle operation. The driver is always responsible for safe driving.
-
Do not operate the Digital Centre Mirror whilst driving. Doing so can be a distraction and it could lose control of your vehicle and cause an accident or serious injury.
-
Do not disassemble or modify the Digital Centre Mirror, the camera unit or wirings. If you do, it may result in accidents or fire. In case you notice smoke or smell coming from the Digital Centre Mirror, stop using the system immediately. Have the system inspected by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
-
Be sure to adjust the Digital Centre Mirror before driving.
-
Switch the system to the conventional rearview mirror mode and be properly seated on the driver’s seat. Then adjust the mirror so as to see the rear window properly.
-
Push the lever all the way to change to digital mirror mode and adjust the display settings. Driving without adjusting the mirror may cause difficulty in watching the display at the Digital Mirror mode (camera view mode) due to the reflection from the surface of the mirror.
-
As the range of the image display by the Digital Centre Mirror is different from that of the optical mirror, make sure to check.
-
-
If the Digital Centre Mirror malfunction, immediately switch the system to the conventional rearview mirror mode.
-
When strong light (for example, sunlight or high beams from following vehicles) enters the camera, a light beam or a glaring light may appear on the monitor screen of the Digital Centre Mirror. In that case, switch the system to the conventional rearview mirror mode appropriately.
-
If the camera lens (1) is dirty, the displayed image may not be clear. In this case, clean it with a soft cloth dampened with water or a swab.
System component
-
Icon display area
Displays icons, adjusting Brightness & Tilt
-
Lever
Operate to change between digital mirror mode and optical mirror mode.
-
Menu button
Press to display the icon display area and select the item you want to adjust (Brightness & Tilt).
-
Select/adjust button
Press to change the setting of the item you want to adjust.
-
Camera indicator
Indicates that the camera is operating normally.
-
HomeLink buttons
For the operation of the “HomeLink® Universal Transceiver”.
How to change the mode
-
Pull the mode select lever to all the way switch to the Digital Centre Mirror mode (camera view mode).
* Displays an image of the area behind the vehicle. In this mode, camera indicator is shown.
-
Push the mode select lever to all the way switch to the optical inside rearview mirror mode.
* Turns off the display of the Digital Centre Mirror allows it to be used as an optical mirror.
Adjusting the mirror height
The height of the rearview mirror can be adjusted to suit your driving posture.
Change to optical mirror mode, adjusting the rearview mirror angle by moving it up and down.
Display settings (Digital mirror mode)
-
Press the menu button (1) The icons will be displayed.
Icons
Settings
Select to adjust the brightness of the display.
Select to adjust the display up/down.
-
Press the menu button (1) repeatedly and select the item you want to adjust.
-
Press the button (2) or button (3) to change the setting.
The icons will disappear if the button is not operated for approximately 5 seconds or more.
* If the brightness of the Digital Centre Mirror is set too high, it may cause eye strain.
Adjust the Digital Centre Mirror to and appropriate brightness. If your eyes become tired, change to optical mirror mode.
To prevent the light sensors from malfunctioning, do not touch or cover them.
Digital mirror mode operating condition
The ENGINE START/STOP button is in the ON position. When the ENGINE START/STOP button is changed ignition switch LOCK/OFF or ACC position, the image will be disappeared.
When using the Digital Centre Mirror in digital mirror mode
-
When the liftgate is open, the Digital Centre Mirror image may not display properly. Before driving, make sure the liftgate is closed.
-
If the display is difficult to see due to reflected light, close the sunshade for the sunroof. (if equipped)
-
Any of the following conditions may occur when driving in the dark, such as at night. None of them indicates that the malfunction has occurred.
-
Colors of objects in the displayed image may differ their actual colour.
-
Depending on your physical condition or age, it may take longer than usual to focus on the displayed image. In this case, change to optical mirror mode.
-
Do not let passengers stare at the displayed image when the vehicle is being driven, as doing so may cause motion sickness.
-
When the system malfunctions
If the symbol shown in the illustration is displayed when using the Digital Centre Mirror in digital mirror mode, the system may be malfunctioning. The symbol will disappear in a few seconds. Operate the lever, change to optical mirror mode and have the vehicle inspected by an authorised Kia dealer/service partner.
-
To prevent the Digital Centre Mirror from malfunctioning.
-
Do not use detergents, such as thinner, benzene, and alcohol to clean the mirror. They may dis colour, deteriorate or damage the mirror surface.
-
Do not remove, disassemble or modify the mirror and camera.
-
Do not allow an organic solvent, vehicle wax, window cleaner or glass coating to adhere to the camera. If this happens, wipe it off as soon as possible.
-
When cleaning the camera lens, wipe the camera lens with a damp soft cloth.
-
Do not strongly rub the camera lens, as it may be scratched and will not be able to transmit a clear image.
-
Do not subject the camera to a strong impact as this could cause a malfunction. If this happens, have the vehicle inspected by an authorised Kia dealer/service partner as soon as possible.
-
Operating the system at the ON position whilst the vehicle is not running would cause discharging of the battery.
-
Do not attach an antenna of wireless device near the Digital Centre Mirror. Electric wave from wireless device may cause disturbed image in Digital Centre Mirror.
-
Do not push buttons excessively or operating the lever roughly may cause a system failure or the Digital Centre Mirror itself to drop.
-
Never rotate the body of Digital Centre Mirror by 90° or more. It may damage the Digital Centre Mirror. Do not apply strong shocks to the body of Digital Centre Mirror. It may cause a system failure.
-
If it is difficult to see the Digital Centre Mirror display screen because of a strong external light, switch the mode to the conventional rearview mirror mode for better use.
Digital Centre Mirror error icon and solution
|
Symptom |
Likely cause |
Solution |
|---|---|---|
|
If the high temp icon ( |
The Digital Centre Mirror is extremely hot. (The display will gradually become more dim. If the temperature continues to increase, the Digital Centre Mirror will turn off.) |
Reducing the cabin temperature is recommended to reduce the temperature of the mirror. (The icon will disappear when the mirror becomes cool.) If the icon does not disappear even though the mirror is cool, have the vehicle inspected by an authorised Kia dealer/service partner. |
|
If the display icon |
The system may be malfunctioning. |
Change to optical mirror mode and have the vehicle inspected by an authorised Kia dealer/service partner. |
) is displayed on the display right side.
has been switched to 
which is the display error icon.