Relaxion comfort seat (if equipped)

Relaxion comfort seats distribute body pressure and concentrated weight on specific body parts that occur whilst sitting in the same position for a long period of time. The seat relieves fatigue and discomfort by providing the optimal sit position.

WARNING

Do not use the relaxion comfort seat whilst the vehicle is moving. Using the relaxion comfort seat could distract the driver and increase the risk of injuries in the event of a collision or sudden stop.
Be careful not to get your body or objects caught whilst the relaxion comfort seat is operating.
As the risk of injury may increase in the event of a collision with the relaxation comfort seat is being operated, use it only when parked/stopped or whilst resting.
If you operate the relaxation comfort seat whilst wearing the seat belt, the seat belt on the chest side may not adhere to your chest firmly, so use it only when parked/stopped or whilst resting.

CAUTION

Check the occupants or other cargo in the luggage area before operating the relaxion comfort seat. Operate after securing sufficient clearance from the instrument panel or rear seatback.

Operating relaxion comfort seat

Press the rear portion of the relaxion comfort seat switch (2) for more than approximately 1 second to move to the relaxation comfort seat position.
If the relaxion comfort seat is operating, press the following buttons to stop the operation.
- Seat adjustment switch (reclining, cushion height)
- Passenger seat walk-in switch
- Relaxion comfort seat switch
After operating the relaxation comfort seat, you can adjust it for a more comfortable posture using the seat adjustment switch.

Non-operating condition(s)

When the vehicle is in R (Reverse)/N (Neutral)/D (Drive) position (Driver's seat)
When the vehicle speed is above 3 km/h (2 mph) (Driver's seat)
When the driver position memory system needs initialization

Returning relaxion comfort seat

Whilst the seat is in the relaxion comfort seat position, press the front portion of the relaxion comfort seat switch (1) for more than approximately 1 second.
The seat cushion and seatback are returned to their original positions in the reverse order of the relaxion seat operation.
- Driver's seat: Seat position when the last shift position is in P (Park)
- Passenger's seat: Stored seat position (initial set position)

CAUTION

Do not operate both switches at the same time. It may damage the relaxion comfort seat system.

NOTICE

Saving the return position of the passenger seat

To save the current passenger seat position as the return position, adjust the passenger seat to the desired position, and then press the front side (1) of the relaxion switch located at the bottom of the seat cushion 3 times within a 2-second period. This will save the current position as the return position.

Non-operating condition(s)

When the vehicle is in R (Reverse)/N (Neutral)/D (Drive) position (Driver's seat)
When the vehicle speed is above 3 km/h (2 mph) (Driver's seat)
When the driver position memory system needs initialization

Resetting relaxion comfort seat

Driver's side

Open the driver's side door when the vehicle is stopped and the vehicle in ON position.
Move the seat forward as far as possible, and raise the seatback angle as forward as possible by using the driver's seat forward/backward adjustment switch and seatback angle adjustment switch.
Press the Driver 1 switch from the driver position memory system and push the front portion of the driver's seat forward/backward adjustment switch (the direction to move the seat position forward) at the same time for approximately 2 seconds.

The initialization process are as follows.

With a beep sound, the initialization process begins.
The seat and backrest automatically move to the rear. A beep sounds continuously during operation.
The seat and backrest will move to the centre again and the initialization process will end with the last beep sound.

The initialization process will be interrupted in the following situations.

When any problem occurs in the driver position memory system
When the driver's side seat adjustment switch is pressed
When the vehicle speed is above 3 km/h (2 mph)
When the driver's side door is closed

CAUTION

Make sure there are no obstacles around the driver's seat before initialization.

NOTICE

If the driver's seat operation and a beep sound stop during initialization, start initialization again.
After initialization, adjust the seat to suit the driver and save it to the driving position memory system again.

Passenger's side

Press the following buttons at the same time for approximately 5 seconds for initialization.

Pressing the front portion of the relaxion comfort seat switch (the direction of the original position of the relaxion comfort seat)
Pressing the rear portion of the cushion height adjustment switch (the direction of lowering the cushion height)
Pressing the upper portion of the seatback angle adjustment switch (the direction of laying the backrest)

The initialization process are as follows.

The forward/backward position, seatback angle, height adjustment, and cushion tilt operate in sequence.
After all operations, initialization is complete.
Press the seat back angle adjustment switch to properly adjust the backrest before use.

The initialization process will be interrupted in the following situations:

When the passenger's side seat adjustment switch is pressed

CAUTION

Make sure there are no obstacles around the passenger seat before initialization.

NOTICE

If the passenger side seat stops working during initialization, start initialization again.
After initialization, adjust the passenger seat to fit the passenger.