Windscreen defrosting and defogging

When the windscreen is covered with frost or moisture, the front view is blurred, you should remove the frost and moisture.

WARNING

Windscreen heating

Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and the windscreen could cause the outer surface of the windscreen to fog up, causing loss of visibility. In this case, set the mode selection to the position and fan speed control to the lower speed.

For maximum defrosting, set the temperature control to the extreme right/hot position and the fan speed control to the highest speed.
If warm air to the floor is desired whilst defrosting or defogging, set the mode to the floor-defrost position.
Before driving, clear all snow and ice from the windscreen, rear window, outside rear view mirrors, and all side windows.
Clear all snow and ice from the bonnet and air inlet in the cowl grill to improve heater and defroster efficiency and to reduce the probability of fogging up the inside of the windscreen.

Contains Topics: Defogging inside windscreen with manual climate control system; Defrosting outside windscreen with manual climate control system; Defogging inside windscreen with automatic climate control; Defrosting outside windscreen with automatic climate control; Auto defogging system (only for automatic climate control system); Defroster; Defogging logic