Search by Title only
Home > Safety features of your vehicle > ISOFIX anchorage and top-tether anchorage (ISOFIX anchorage system) for children > Securing a Child Restraint System seat with "Top-tether Anchorage" system

Securing a Child Restraint System seat with "Top-tether Anchorage" system (if equipped)

Type A
Type B

Child Restraint hook holders are located on the seat back.

Type A
Type B

  1. Route the Child Restraint System seat strap over the seatback.

    For vehicles with adjustable headrest, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.

  2. Connect the top-tether to the top-tether anchorage, then tighten the top-tether according to the instructions of your Child Restraint System's manufacturer to firmly attach the Child Restraint System to the seat.

WARNING

Take the following precautions when installing the top-tether:

  • Read and follow all installation instructions provided with your Child Restraint System.

  • NEVER attach more than one Child Restraint System to a single ISOFIX top-tether anchorage. This could cause the anchorage or attachment to come loose or break.

  • Do not attach the top-tether to anything other than the correct top-tether anchorage. It may not work properly if attached to something else.

  • Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seatbelts, harnesses, or for attaching other items or equipment to the vehicle.