Search by Title only
Home > Features of your vehicle > Lighting > Lighting control

Lighting control

The light switch has a headlight and a position lamp position.
Type A
Type B
Type C

To operate the lights, turn the knob at the end of the control lever to one of the following positions:

  1. OFF/O position

  2. Auto light position

  3. Position & Tail lamp

  4. Headlight position

Position & Tail lamp

Type A
Type B
Type C

When the light switch is in the position lamp position, the front position lamp, taillamp, and the license plate lamp will turn ON.

Head light (Low Beam)

Type A
Type B
Type C

When the light switch is in the head light position, head light (low beam), tail, license light will turn ON.

NOTICE

The ignition switch or ENGINE START/STOP button must be in the ON position to turn on the headlights.

Auto light

Type A
Type B
Type C

When the light switch is in the AUTO light position, the taillights and headlights will turn ON or OFF automatically depending on the amount of light outside the vehicle.

CAUTION

  • Never place anything over the sensor (1) located on the instrument panel as this will ensure better auto-light system control.

  • Don't clean the sensor using a window cleaner, the cleaner may leave a light film which could interfere with sensor operation.

  • If your vehicle has window tint or other types of metallic coating on the front windscreen, the Auto light system may not work properly.