A: Check Driver Assistance system.

If there is a problem with Forward/Reverse Parking Distance Warning or related functions and parts, a warning message is displayed on the cluster.

The contents of the warning can be checked in the service message of the utility information view of the cluster display window. If it still does not work properly, we recommend you visit an authorised Kia dealer/service partner.

A: Driver Assistance system limited. Ultrasonic sensor blocked.

The ultrasonic sensor is a sensor that detects objects around the vehicle. The Parking Distance Warning may be temporarily limited or may not operate if snow, rain, foreign substances, etc. get on the sensor. You can check the detection sensor blind warning target (ultrasonic sensor) in the service message of the utility information view in the cluster display window.

Parking Distance Warning will work normally if you remove the contamination from the recognition sensor. Always keep it clean.

If it still does not work properly even after you have removed the contamination, we recommend you visit an authorised Kia dealer/service partner.

Parking Distance Warning may not operate properly when:

• Moisture is frozen to the sensor

• Sensor is covered with foreign material, such as snow or water (Parking Distance Warning will operate properly when such substance is removed.)

• The weather is extremely hot or cold

• The sensor or sensor assembly is disassembled

• The surface of the sensor is pressed hard or hit with a hard object

• The surface of the sensor is scratched with a sharp object

• The sensors or its surrounding area is directly sprayed with high pressure washer

• When objects emitting ultrasonic waves, such as a vehicle's horn, motorcycle engine, or large vehicle air brakes are nearby.

Parking Distance Warning may malfunction when:

• Heavy rain or water spray is present

• Water flows on the surface of the sensor

• Affected by another vehicle's sensors

• The sensor is covered with snow or ice

• Driving on uneven road, gravel roads or bushes

• Objects that generate ultrasonic waves are near the sensor

• License plate is installed in a different spot from the original location

• The vehicle bumper height or ultrasonic sensor installation has been modified

• Attaching equipment or accessories next to the ultrasonic sensors

• When objects emitting ultrasonic waves, such as a vehicle's horn, motorcycle engine, or large vehicle air brakes are nearby.

The following objects may not be detected:

• Sharp or slim objects, such as ropes, chains or small poles.

• Narrow objects, such as corners of a square column

• Objects, which tend to absorb sensor frequency, such as clothes, spongy material or snow.

• Objects smaller than 40 inches (100 cm) in length and narrower than 6 inches (14 cm) in diameter.

• Pedestrians, animals, or objects that are very close to the ultrasonic sensors