LCD display modes (For CUV)

	Mode
	Trip Computer	Turn By Turn (TBT)*	Driving Assist	User Settings*	Master warning
Up/Down	Fuel Economy	Route Guidance	Lane Keeping Assist/Smart Cruise Control/Lane Following Assist	Driver Assistance	The Master Warning mode displays warning messages related to the vehicle when one or more systems is not operating normally.
	Accumulated Info	Destination Info	Driver Attention Warning	Door
	Drive Info		Intelligent Speed Limit Warning	Light
	Digital speedometer		TPMS*	Sound
	Energy Flow (for MHEV)			Convenience
	Urea level (for Diesel)			Service Interval
				Other
				Language
				Reset

The information provided may differ depending on which functions are applicable to your vehicle.

*: if equipped

* For controlling the LCD modes, refer to More Details“.

Trip computer

The trip computer mode displays information related to vehicle driving parameters including Accumulated info, Driving information, and so on.

* For more details, refer to More Details.

Urea level gauge (for Smartstream D1.6 MHEV)

This mode displays the amount of the remaining urea solution in the urea solution tank.

Turn By Turn mode (if equipped)

This mode displays the state of the Infotainment System.

Driving Assist mode

Lane Keeping Assist (if equipped)

Smart Cruise Control (if equipped)

Lane Following Assist (if equipped)
Driver Attention Warning (if equipped)
Intelligent Speed Limit Warning (if equipped)

* For more details, refer to each system information in More Details.

Setting (if equipped)

To change the Driver Assistance settings, press the OK button on the steering wheel for more than 1 second when the Driving Assist mode is displayed.

WARNING

Whilst driving, please do not change the setting mode. It may distract your attention and cause the accident.

Item	Explanation
SCC response	Fast/Normal/Slow
Driving assist	Leading vehicle departure alert/LFA (Lane Following Assist)/SLW (Speed Limit Warning)
DAW (Driver Attention Warning)	High sensitivity/Normal sensitivity/Off
Warning timing	Normal/Late
Lane safety	Standard LKA (Lane Keep Assist)/LDW (Lane Departure Warning)/Off
Forward safety	Active asssist/Warning only/Off
Blind-spot safety	SEW (Safe Exit Warning) Active asssist/Warning only/Off
Parking safety	Rear cross-traffic safety

NOTICE

The information provided may differ depending on which functions are applicable to your vehicle.

Tyre pressure (if equipped)

This mode displays information related to Tyre Pressure.

* For more details, refer to More Details or More Details.

Master warning mode

This warning light informs the driver the following situations.

Forward Collision-Avoidance Assist malfunction (if equipped)
Forward Collision-Avoidance Assist radar blocked (if equipped)
Blind-Spot Collision Warning malfunction (if equipped)
Blind-Spot Collision Warning radar blocked (if equipped)
High Beam Assist malfunction (if equipped)
Smart Cruise Control malfunction (if equipped)
Smart Cruise Control radar blocked (if equipped)
LED headlamp malfunction (if equipped)
TPMS failure, low pressure (if equipped), etc.

At this time, a Master Warning icon () will appear on the LCD display. If the warning situation is solved, the master warning light will be turned off and the Master Warning icon will disappear.

User settings mode (if equipped)

In this mode, you can change the settings of the instrument cluster, doors, lamps, etc.

The information provided may differ depending on which functions are applicable to your vehicle.

Shift to P to edit settings/Engage parking brake to edit settings

This warning message appears if you try to adjust the User Settings whilst driving.

Automatic transmission, Dual clutch transmission

For your safety, change the User Settings after parking the vehicle, applying the parking brake and moving the shift lever to P (Park).

Manual Transmission, Intelligent Manual Transmission

For your safety, change the User Settings after engaging the parking brake.

Driver assistance (if equipped)

Items	Explanation
SCC response (if equipped)	Fast/Normal/Slow To adjust the sensitivity of Smart Cruise Control. * For more details, refer to More Details.
Driving assist	Leading vehicle departure alert To select the function. * For more details, refer to More Details. LFA (Lane Following Assist) To select the function. * For more details, refer to More Details. SLW (Speed Limit Warning) To select the function. * For more details, refer to More Details.
DAW (Driver Attention Warning (if equipped)	High sensitivity/Normal sensitivity/Off To adjust the sensitivity of the Driver Attention Warning. * For more details, refer to More Details.
Warning timing (if equipped)	Normal/Late To select the Warning Time.
Forward safety (if equipped)	Active assist/Warning only/Off To select the functions. * For more details, refer to More Details or More Details.
Lane safety (if equipped)	Assist/Warning only/Off To select the functions. * For more details, refer to More Details.
Blind-spot safety (if equipped)	SEW (Safe Exit Warning) To select the function. * For more details, refer to More Details. Active assist/Warning only/Off To select the function. * For more details, refer to More Details or More Details.
Parking safety (if equipped)	Rear cross-traffic safety To select the function. * For more details, refer to More Details or More Details.

* The information provided may differ depending on which systems are applicable to your vehicle.

Door

Items	Explanation
Auto lock	Enable on shift (For Automatic transmission, Dual Clutch Transmission) : All doors will be automatically locked if the vehicle is shifted from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) position. (with the engine ON, it is activated.) Enable on speed: All doors will be automatically locked when the vehicle speed exceeds 15 km/h (9.3 mph). Off : The auto door lock operation will be deactivated.
Auto unlock	On shift to P (For Automatic transmission, Dual Clutch Transmission): All doors will be automatically unlocked if the gear is shifted to the P (Park) position. (with the engine ON, it is activated.) On key out/Vehicle off : All doors will be automatically unlocked when the ignition switch or the ENGINE START/STOP button is set to the OFF position. Off : The auto door unlock operation will be cancelled.
Power Tailgate (if equipped)	To activate or deactivate power tailgate. * For more details, refer to More Details.
Smart Tailgate (if equipped)	To activate or deactivate the Smart Tailgate. * For more details, refer to More Details.

* The information provided may differ depending on which systems are applicable to your vehicle.

Lights

Items	Explanation
One touch turn indicator	Off: The one touch turn signal function will be deactivated. 3, 5, 7 flashes: The turn signal indicator will blink 3, 5, or 7 times when the turn signal lever is moved slightly. * For more details, refer to More Details.
Ambient lighting (if equipped)	To activate or deactivate the headlight delay function.
Head lamp delay (if equipped)	To activate or deactivate the headlight delay function.

Items

Explanation

One touch turn indicator

Off: The one touch turn signal function will be deactivated.
3, 5, 7 flashes: The turn signal indicator will blink 3, 5, or 7 times when the turn signal lever is moved slightly.

* For more details, refer to More Details.

Ambient lighting (if equipped)

To activate or deactivate the headlight delay function.

Head lamp delay (if equipped)

To activate or deactivate the headlight delay function.

* The information provided may differ depending on which functions are applicable to your vehicle.

Sound

Items	Explanation
Volume for PDW (Parking Distance Warning)	Level 1, 2, 3 To select the Parking Distance Warning Volume.
Welcome sound (if equipped)	If this item is checked, the welcome sound function will be activated.

Items

Explanation

Volume for PDW (Parking Distance Warning)

Level 1, 2, 3

To select the Parking Distance Warning Volume.

Welcome sound (if equipped)

If this item is checked, the welcome sound function will be activated.

* The information provided may differ depending on which functions are applicable to your vehicle.

Convenience (if equipped)

Items	Explanation
Seat easy access (if equipped)	Off/Norma/Extended To select the function. * For more details, refer to More Details.
Welcome mirror/light (if equipped)	On door unlock/On driver approach To select the welcome mirror/light function
Wireless charging system (if equipped)	To activate or deactivate the Wireless Charging System function. * For more details, refer to More Details.
Wiper/Lights display (if equipped)	If this item checked, the Wiper/Lights Display will be activated.
Auto rear wiper (reverse)	If this item is checked, the auto rear wiper will be activated
Gear position pop-up (if equipped)	If this item checked, the gear position pop-up display will be activated.
Icy road warning (if equipped)	If this item checked, the Icy road warning will be activated.

If the service interval is activated and the time and distance is adjusted, messages are displayed in the following situations each time the vehicle is turned on.

Service in: Displayed to inform the driver the remaining mileage and days to service.
Service required: Displayed when the mileage and days to service has been reached or passed.

If any of the following conditions occur, the mileage and number of days to service may be incorrect.

The battery cable is disconnected.
The battery is discharged.

Other

Items	Explanation
Fuel economy auto reset	Off: The average fuel economy will not reset. After vehicle On/After refuelling : The average fuel economy will reset automatically after vehicle on/refuelling.
Fuel economy unit	km/L, L/100km, MPG To select the Fuel economy unit.
Temperature unit	°C/°F To select the Temperature unit.
Tyre pressure unit	psi, kPa, bar To select the Tyre Pressure Unit.

* The information provided may differ depending on which functions are applicable to your vehicle.

Language

Items	Explanation
Language	To select language.

Reset

Items	Explanation
Reset	You can reset the menus in the User Settings mode.