Lane Keeping Assist setting
Setting features
Lane safety
With the ignition switch or ENGINE START/STOP button in the On position, select “User settings → Driver assistance → Lane safety” at the LCD display or infotainment system to set whether to use each function.
-
If ‘Assist’ is selected, Lane Keeping Assist will automatically assist the driver’s steering when lane departure is detected to help prevent the vehicle from moving out of its lane.
-
If ‘Warning only’ is selected, Lane Keeping Assist will warn the driver with an audible warning and steering wheel vibration (if equipped) when lane departure is detected. The driver must steer the vehicle.
-
If ‘Off’ is selected, Lane Keeping Assist will turn off. The indicator light () will turn off on the cluster.
-
If ‘Warning only’ is selected, steering is not assisted.
-
Lane Keeping Assist does not control the steering wheel when the vehicle is driven in the middle of the lane.
-
The driver should always be aware of the surroundings and steer the vehicle if ‘Off’ is selected.
Turning Lane Keeping Assist On/Off (except CUV)
With the ignition switch or ENGINE START/STOP button in the On position, press and hold the Lane Safety button located on the instrument panel to turn on Lane Keeping Assist. The white indicator light () will illuminate on the cluster. Press and hold the button again to turn off the function.
To activate/deactivate Lane Keeping Assist, with the ignition switch or ENGINE START/STOP button in the On position, press and hold the Lane Driving Assist button () located on the steering wheel to turn off Lane Keeping Assist. Press and hold the button again to turn on the function.
The indicator () in the cluster display will initially illuminate gray. If you pressing and holding the Lane Driving Assist button located on the steering wheel, Lane Keeping Assist will be turned off and the indicator on the cluster display will go off.
When Lane Keeping Assist is turned off with the Lane Driving Assist button, Lane Safety settings will turn off.
Turning Lane Keeping Assist On/Off (for CUV)
To activate/deactivate Lane Keeping Assist, with the ignition switch or ENGINE START/STOP button in the On position, Lane Keeping Assist turns on automatically. The indicator () in the cluster display will initially illuminate white.If you press the Lane Safety button located on the instrument panel on the lower left hand side of the driver, Lane Keeping Assist will be turned off and the indicator on the cluster display will go off.
The colour of indicator will change depend on the condition of Lane Keeping Assist.
-
White: Sensor does not detect the lane marker or vehicle speed is less than 60 km/h (37 mph).
-
Green: Sensor detects the lane marker or road edge and function is able to control the steering.
Warning volume
With the ignition switch or ENGINE START/STOP button in the On position, select “User settings → Driver assistance → Warning volume” at the LCD display or infotainment system to change the Warning Volume to ‘High’, ‘Medium, ‘Low’ or 'Off' (if steering wheel vibration equipped) for Lane Keeping Assist. However, even if ‘Off’ is selected, the Hands-off Warning volume will not be turned off. Steering wheel vibration (if equipped) function will also remain on even if ‘Off’ is selected.
If you change the Warning Volume, the Warning Volume of other Driver Assistance system may change.