License plate lamp bulb replacement
5 Door, Shooting brake
Wagon, CUV
1
Remove the lamp assembly by using a screwdriver.
2
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots
on the assembly.
3
Remove the bulb from bulb-socket by pulling it out.
4
Insert a new bulb by inserting it into the bulb-socket.
5
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly.
Push the socket into the assembly and turn the socket clockwise.
6
Install the lamp assembly to the lamp housing.