The luggage rail system may prevent the luggage from sliding around in the luggage compartment.

Put both pillars (A) from the segmentation bar in the openings from the rail.
To move the segmentation bar, put your hand on the side of the pillar and push down the lever arm (B).
Make sure the pillars click into place.
To release the belt, turn the upper element (C) to the left or right until it clicks.
Now you can pull the belt (D) and secure your luggage by putting the belt around the luggage and put the hook (E) into the middle of the segmentation bar (F).
For bulky luggage, you can hook both hooks into each other.
To make sure the belt locks, put the upper element (C) back into the lock position (1).

CAUTION

The segmentation bar must be mounted and demounted with both pillars simultaneously.
Max. load: 30 kg with one belt

40 kg with two belts

Put the shackle (A) in the position where the shackle is put in the rail.
To move the shackle, press the button (1) and move the shackle along the rail.
Make sure the shackle is clicked into place.
To fix the luggage, pull up the hook (2) in direction to the middle of the cargo bay.
Now you can mount e.g. belt to fix the luggage in the hook.
The shackle cannot be used in the position where the shackle is put in and out of the rail (3).

CAUTION

Tensile force: max. 30 kgf. for 1 shackle