CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather.

Using oils of any viscosity other than those recommended could result in engine damage.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

Smartstream G1.0 T-GDi / Smartstream G1.0 T-GDi MHEV / Smartstream G1.5 T-GDi / Smartstream G1.5 T-GDi MHEV

Temperature Range for SAE Viscosity Numbers
Temperature	°C
	°F
Except middle east
For middle east

Petrol 1.6L MPI

Temperature Range for SAE Viscosity Numbers
Temperature	°C
	°F
Petrol 1.6L MPI	For Europe
	Except Europe & Middle East*3
	For Middle East

*1. For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-20 (Except Middle East) or 5W-30 (For Middle East). However, if the engine oil is not available in your country, select the proper engine oil using the engine oil viscosity chart.

*2. For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-30 (ACEA A5/B5).

*3. Middle East includes Libya, Algeria, Morocco, Tunisia, Sudan, Egypt and Iran.

Petrol 1.6L T-GDI

Temperature Range for SAE Viscosity Numbers
Temperature	°C
	°F
Petrol 1.6L T-GDI

Smartstream D1.6 MHEV

Temperature Range for SAE Viscosity Numbers
Temperature	°C
	°F
Smartstream D1.6

An engine oil displaying this American Petroleum Institute (API) Certification Mark conforms to the International Lubricant Specification Advisory Committee (ILSAC). It is recommended to only use engine oils that uphold this API Certification Mark.