Driver position memory system (if equipped, for power seat)
A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the system memory, different drivers can reposition the driver seat based upon their driving preference. If the battery is disconnected, the position memory will be erased and the driving position should be restored in the system.
Never attempt to operate the driver position memory system while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury, or property damage.
Storing positions into memory using the buttons on the door
Storing driver’s seat positions
-
Shift the drive dial into P while POWER button is ON.
-
Adjust the driver’s seat and outside rearview mirror comfortable for the driver.
-
Press SET button on the control panel. The system will beep once.
-
Press one of the memory buttons (1 or 2) within 4 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.
Recalling positions from memory
-
Shift the drive dial into P while POWER button is ON.
-
To recall the position in the memory, press the desired memory button (1 or 2). The system will beep once, then the driver’s seat will automatically adjust to the stored position.
Adjusting the control switch for the driver’s seat while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.
Use caution when recalling the adjustment memory while sitting in the vehicle. Push the seat position control switch to the desired position immediately if the seat moves too far in any direction.