Speedometer

The speedometer indicates the speed of the vehicle and is calibrated in miles per hour (mph) and/or kilometers per hour (km/h).

Power/Charge gauge

The Power/Charge gauge shows the energy consumption rate of the vehicle and the charge/discharge status of the regenerative brakes.

POWER : It shows the energy consumption rate of the vehicle when driving uphill or accelerating. The more electric energy is used, the higher the gauge level.
CHARGE : It shows the charging status of the battery when it is being charged by the regenerative brakes (decelerating or driving on a downhill road). The more electric energy is charged, the lower the gauge level.

State of Charge (SOC) gauge for high voltage battery

The SOC gauge shows the charging status of the high voltage battery. “0 (Low)” position on the indicator indicates that there is not enough energy in the high voltage battery. “1 (High)” position indicates that the driving battery is fully charged. When driving on highways or motorways, make sure to check in advance if the driving battery is charged enough.

When there are 2 gauge bars (near the “0 (Low)” area) on the SOC gauge, the warning lamp turns ON to alert you of the battery level.

When the warning lamp turns ON the vehicle can drive an additional 20 ~ 30 km (12 ~ 18 miles) depending on the driving speed, heater/air conditioner, weather, driving style, and other factors. Charging is required.

NOTICE

When there are 1-2 gauge bars left for the high voltage battery, the vehicle speed is limited and then eventually the vehicle will turn OFF. Charge the vehicle immediately.

Distance to empty

The distance to empty is the estimated distance the vehicle can be driven with the remaining level of the high voltage battery.
The distance to empty is displayed differently according to the selected drive mode in the Drive Mode Integrated Control.

* For more details, refer to More Details.

Additional Distance to Empty from Regenerative Braking

The additional distance to empty which is converted from the energy regenerated by the regenerative braking is displayed if the ECO/ECO+ mode is selected by pressing the Drive Mode button. The display is initialized to 0 if the regenerative braking stops because of acceleration, etc.

Odometer

The Odometer indicates the total distance that the vehicle has been driven and should be used to determine when periodic maintenance should be performed.

Odometer range : 0 ~ 1,599,999 kilometers or 999,999 miles.

Outside Temperature Gauge

This gauge indicates the current outside air temperatures by 1°C (1°F).

Temperature range : -40 ~ 60°C (-40 ~ 140°F)

The outside temperature on the display may not change immediately like a general thermometer to prevent the driver from being distracted.

To change the temperature unit (from °C to °F or from °F to °C)

The temperature unit can be changed by using the “User Settings” mode of the LCD window.