When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement.

Type A

1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip.

   
   

   CAUTION

   Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.

2. Compress the clip and slide the blade assembly downward.

   

3. Lift it off the arm.

   

4. Install the blade assembly in the reverse order of removal.

Type B

1. Raise the wiper arm.

   
   

   CAUTION

   Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield.

2. Lift up the wiper blade clip. Then pull down the blade assembly and remove it.

   

3. Install the new blade assembly.

   

1. Raise the wiper arm and pull out the wiper blade assembly.

   

2. Install the new blade assembly by inserting the center part into the slot in the wiper arm until it clicks into place.

   

3. Make sure the blade assembly is installed firmly by trying to pull it slightly.

To prevent damage to the wiper arms or other components, have the wiper blade replaced by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.