Opening the hood
-
Pull the release lever to unlatch the hood. The hood should pop open slightly.
WARNINGOpen the hood after turning off the vehicle on a flat surface, shifting the drive dial to the P(Park) position and setting the parking brake.
-
Go to the front of the vehicle, raise the hood slightly, push the secondary latch (1) up side and lift the hood (2).
-
Pull out the stay rod.
-
Hold the hood opened with the stay rod (1).
WARNING-
Grasp the stay rod in the area wrapped in rubber.The rubber will help prevent you from being burned by hot metal when the motor compartment is hot.
-
The stay rod must be inserted completely into the hole provided whenever you inspect the motor compartment. This will prevent the hood from falling and possibly injuring you.
-