Inside rearview mirror
Adjust the rearview mirror so that the center view through the rear window is seen. Make this adjustment before you start driving.
Rear visibility
Do not place objects in the rear seat or cargo area which would interfere with your vision through the rear window.
Do not adjust the rearview mirror while the vehicle is moving. This could result in loss of control, and an accident which could cause death, serious injury or property damage.
Do not modify the inside mirror and don’t install a wide mirror. It could result in injury, during an accident or deployment of the air bag.
Day/night rearview mirror (if equipped)
Make this adjustment before you start driving and while the day/night lever(1) is in the day position.
Pull the day/night lever(2) toward you to reduce the glare from the headlights of the vehicles behind you during night driving.
Remember that you lose some rearview clarity in the night position.
* (1) : Day, (2) : Night
Electrochromic mirror (ECM) (if equipped)
The electric rearview mirror automatically controls the glare from the headlights of the vehicles behind you in nighttime or low light driving conditions. The sensor (3) mounted in the mirror senses the light level around the vehicle, and automatically controls the headlight glare from the vehicles behind you.
When the vehicle is running, the glare is automatically controlled by the sensor mounted in the rearview mirror.
Whenever the drive dial is shifted into reverse (R), the mirror will automatically go to the brightest setting in order to improve the drivers view behind the vehicle.
When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror. It may cause the liquid cleaner to enter the mirror housing.
To operate the electric rearview mirror:
-
The mirror defaults to the ON position whenever the POWER button is ON.
-
Press the ON/OFF button (1) to turn the automatic dimming function off. The mirror indicator light (2) will turn off.
Press the ON/OFF button (1) to turn the automatic dimming function on. The mirror indicator light (2) will illuminate.