One pedal driving
The driver can stop the vehicle by pulling and holding the left side paddle shifter.
Operating Conditions
The system enters the operating condition when the conditions below are met:
-
The driver's door is closed.
-
The driver's seat belt is fastened.
To operate:
-
Pull and hold the left side paddle shifter while coasting.
-
When the vehicle speed is above 3 km/h, release the paddle shifter to return to the previously set level.
-
When the vehicle speed is below 3 km/h, the function maintains control to stop the vehicle even though the paddle shifter is released.
-
While the One pedal driving is in activation, the driver can control the vehicle stopping position using the accelerator pedal.
Automatic engagement of EPB
After the vehicle is stopped by the One Pedal Driving function, EPB is automatically engaged when any of these conditions occur:
-
The driver's door is open
-
The driver's seatbelt is unfastened.
-
The hood is open
-
The tailgate is open.
-
5 minutes have passed after the vehicle has stopped.
-
The system operation is limited due to other reasons.
WARNING-
Stopping the vehicle may not be possible according to the vehicle and road conditions. Pay attention to the road condition ahead and apply the brake if necessary.
-
Avoid increasing the regenerative braking level suddenly on slippery roads(like snow or icy conditions) because it may lead slipping of the tires and skidding of vehicle. It can be dangerous due to the loss of the vehicle's steering force.
-