Regenerative Braking (Paddle Shifter)
The paddle shifter is used to adjust the regenerative braking level from 0 to 3 during decelerating or braking.
-
Left side (): Increases regenerative braking and deceleration.
-
Right side (): Decreases regenerative braking and deceleration.
-
Pull and hold the left side paddle shifter for more than 0.5 seconds and One Pedal Driving function is operated, increasing the regenerative braking. In this case, stopping the vehicle is possible by keep on pulling the paddle shifter.
Refer to the More Details.
-
With the Smart Regeneration System activated, pull and hold the right side paddle shifter for over 1 second to turn on and off the automatic change of the regenerative braking.
The paddle shifter does not operate when:
-
The [] and [] paddle shifters are pulled at the same time.
-
The vehicle is decelerating by depressing the brake pedal.
-
Cruise Control or Smart Cruise Control is activated.
The selected regenerative braking level is displayed on the instrument cluster.
Initial setting of the regenerative braking level vary according to the selected Drive mode.
Drive mode |
Initial setting |
---|---|
ECO+ |
2 |
ECO |
2 |
NORMAL |
1 |
SPORT |
1 |
* For more details, refer to More Details.