• Once you set the ENGINE START/STOP button to the ON position.

  • It illuminates for approximately 6 seconds and then goes off.

• When there is a malfunction with the SRS.

  In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• Once you set the ENGINE START/STOP button to the ON position.

  • It illuminates for approximately 3 seconds.

  • It remains on if the parking brake is applied.

• When the parking brake is applied.

• When the brake fluid level in the reservoir is low.

  • If the warning light illuminates with the parking brake released, it indicates the brake fluid level in reservoir is low.

1. Drive carefully to the nearest safe location and stop your vehicle.

2. With the engine stopped, check the brake fluid level immediately and add fluid as required (For more details, refer to More Details). Then check all brake components for fluid leaks. If any leak on the brake system is still found, the warning light remains on, or the brakes do not operate properly, do not drive the vehicle.

   In this case, have the vehicle towed to a professional workshop and inspected.

   Kia recommends to visit an authorised Kia dealer/service partner.

Your vehicle is equipped with dualdiagonal braking systems. This means you still have braking on two wheels even if one of the dual systems should fail.

With only one of the dual systemsworking, more than normal pedal travel and greater pedal pressure are required to stop the vehicle.

Also, the vehicle will not stop in asshort a distance with only a portion of the brake system working.

If the brakes fail whilst you are driving, shift to a lower gear for additional engine braking and stop the vehicle as soon as it is safe to do so.

WARNING

Parking Brake & Brake Fluid Warning Light

Driving the vehicle with a warninglight ON is dangerous. If the Parking Brake & Brake Fluid Warning Light illuminates with the parking brake released, it indicates that the brake fluid level is low.

In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• Once you set the ENGINE START/STOP button to the ON position.

  • It illuminates for approximately 3 seconds and then goes off.

• When there is a malfunction with the ABS (The normal braking system will still be operational without the assistance of the anti-lock brake system).

  In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• When the ABS and regular brake system may not work normally.

  In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

WARNING

Electronic Brake force Distribution (EBD) System Warning Light

When both ABS and Parking Brake & Brake Fluid Warning Lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking.

In this case, avoid high speed driving and abrupt braking. Have the vehicle inspected by a professional workshop as soon as possible. Kia recommends to visit an authorised Kia dealer/service partner.

NOTICE

Electronic Brake force Distribution (EBD) System Warning Light

When the ABS Warning Light is on or both ABS and Parking Brake & Brake Fluid Warning Lights are on, the speedometer, odometer, or tripmeter may not work. Also, the MDPS Warning Light may illuminate and the steering effort may increase or decrease.

In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• Once you set the ENGINE START/STOP button to the ON position.

  • It remains on until the engine is started.

• When there is a malfunction with the MDPS.

  In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• Once you set the ENGINE START/STOP button to the ON position.

  • It remains on until the engine is started.

• When there is a malfunction with the emission control system.

  In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

CAUTION

Malfunction Indicator Lamp (MIL)

Driving with the Malfunction Indicator Lamp (MIL) on may cause damage to the emission control systems which could effect drivability and/or fuel economy.

CAUTION

Petrol Engine

If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power.

In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• When there is a malfunction with either the alternator or electrical charging system.

1. Drive carefully to the nearest safe location and stop your vehicle.

2. Turn the engine off and check the alternator drive belt for looseness or breakage.

   If the belt is adjusted properly, there may be a problem in the electrical charging system.

   In this case, have the vehicle inspected by a professional workshop as soon as possible.

   Kia recommends to visit an authorised Kia dealer/service partner.

• When the engine oil pressure is low.

• When the fuel tank is nearly empty.

  Add fuel as soon as possible.

• Once you set the ENGINE START/STOP button to the ON position.

  • It illuminates for approximately 3 seconds and then goes off.

• When one or more of your tyres are significantly underinflated (The location of the underinflated tyres are displayed on the LCD display).

* For more details, refer to More Details.

• When there is a malfunction with the TPMS.

  In this case, have the vehicle inspected by a professional workshop as soon as possible. Kia recommends to visit an authorised Kia dealer/service partner.

* For more details, refer to More Details.

WARNING

Safe Stopping

• The TPMS cannot alert you to severe and sudden tyre damage caused by external factors.

• If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road.

• When you drive the vehicle more than 120 km/h.

  • This is to prevent you from driving your vehicle with overspeed.

  • The overspeed warning chime also sound for approximately 5 seconds.

• When there is a malfunction with the LED headlamp.

In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

CAUTION

LED Headlamp Warning Light

Continuous driving with the LED Headlamp Warning Light on can reduce LED headlamp (low beam) life.

• Once you set the ENGINE START/STOP button to the ON position.

  • Forward Safety warning light illuminates for approximately 3 seconds and then turns off.

• When there is a malfunction with Forward Collision-Avoidance Assist.

  If this occurs, have the vehicle inspected by a professional work shop. Kia recommends to visit an authorised Kia dealer/service partner.

* For more details, refer to More Details.

• When there is a malfunction with the AWD system.

In this case, have the vehicle inspected by a professional work shop. Kia recommends to visit an authorised Kia dealer/service partner.

• This warning light informs the driver the following situations

  • Forward Collision-Avoidance Assist malfunction (if equipped)

  • Forward Collision-Avoidance Assist radar blocked (if equipped)

  • Blind-Spot Collision-Avoidance Assist malfunction (if equipped)

  • Blind-Spot Collision-Avoidance Assist radar blocked (if equipped)

  • Intelligent Speed Limit Warning malfunction (if equipped)

  • High Beam Assist malfunction (if equipped)

  • Smart Cruise Control malfunction (if equipped)

  • Smart Cruise Control radar blocked (if equipped)

  • LED headlamp malfunction

  • TPMS failure, low pressure, etc.

  If the warning situation is solved, the master warning light will turn off.

• Once you set the ENGINE START/STOP button to the ON position.

  • The Dynamic Bending Light warning light illuminates for approximately 3 seconds and then turns off.

• When there is a malfunction with the Dynamic Bending Light (DBL).

1. Drive carefully to the nearest safe location and stop your vehicle.

2. Turn the engine off and restart the engine. If the warning light remains on, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

• Once you set the ENGINE START/STOP button to the ON position.

  • It illuminates for approximately 3 seconds and then goes off.

• When there is a malfunction with the EPB.

  In this case, have the vehicle inspected by a professional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

NOTICE

Electronic Parking Brake (EPB) Warning Light

The Electronic Parking Brake (EPB) Warning Light may illuminates when the Electronic Stability control (ESC) Indicator Light comes on to indicates that the ESC is not working properly (This does not indicate malfunction of the EPB).

• When there is a malfunction with Petrol Particulate Filter (PPF) system.

• When this warning light illuminates, it may turn off after driving the vehicle:

  • The vehicle should be driven for more than 30 minutes at a speed of 80 km/h (50 mph) and faster.

  • Ensure the following conditions are all met: safe road conditions, transmission 3rd gear or above, and engine speed of 1,500 - 4,000 rpm.

If this warning light blinks in spite ofthe procedure (at this time the LCDwarning message will be displayed),have the PPF system checked by aprofessional workshop. Kia recommends to visit an authorised Kia dealer/service partner.

CAUTION

Petrol Engine with PPF (if equipped)

If you continue to drive with the PPF warning light blinking for a long time, the PPF system can be damaged and fuel consumption can worsen.