Notes on the safe use of the Tyre Mobility Kit
-
Park your car at the side of the road so that you can work with the Tyre Mobility Kit away from moving traffic. Place your warning triangle in a prominent place to make passing vehicles aware of your location.
-
To be sure your vehicle will not move, even when you're on fairly level ground, always set your parking brake.
-
Only use the Tyre Mobility Kit for sealing/inflation passenger car tyres. Do not use on motorcycles, bicycles or any other type of tyres.
-
Do not remove any foreign objects such as nails or screws -that have penetrated the tyre.
-
Before using the Tyre Mobility Kit, read the precautionary advice printed on the sealant bottle!
-
Provided the car is outdoors, leave the engine running. Otherwise operating the compressor may eventually drain the car battery.
-
Never leave the Tyre Mobility Kit unattended whilst it is being used.
-
Do not leave the compressor running for more than 10 min. at a time or it may overheat.
-
Do not use the Tyre Mobility Kit if the ambient temperature is below -30°C (-22°F).
-
When the tyre and wheel are damaged, do not use Tyre Mobility Kit for your safety.

-
If the sealant gets on your skin, wash it with a large amount of water and if it irritates continuously, visit a doctor for examination.
-
If the sealant gets into your eyes, raise your eyelid and wash for at least 15 minutes. If it irritates continuously, visit a doctor for examination.
-
If you have drank the sealant, wash the mouth and drink a large amount of water.
However, do not give anything to an unconscious person and see the doctor immediately.
Exposure to the sealant for a long time may cause damage to the bodily tissues.