Operating door locks from outside the vehicle
To remove the cover :
-
Pull out the door handle.
-
Press the lever (1) located inside the bottom part of the cover with a key or flat-head screwdriver.
-
Push out the cover (2) whilst pressing the lever.
-
Turn the key (3) toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.
-
If you lock/unlock the driver’s door with a key, only the driver’s door will lock/unlock.
-
Doors can also be locked and unlocked with the transmitter.
-
Once the doors are unlocked, they may be opened by pulling the door handle.
-
When closing the door, push the door by hand. Make sure the doors are closed securely.
-
When the vehicle’s battery run out and you leave the vehicle, make sure all the door are locked. You can lock the driver’s door with a key and the rest of the door with the lock button above the door inside handle.
Be careful not to damage the cover whilst removing it or misplace it after removing it.
-
In cold and wet climates, door lock and door mechanisms may not work properly due to freezing conditions.
-
If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the system may stop operating temporarily in order to protect the circuit and prevent damage to system components.
-
If you don’t close the door securely, the door may open again.
-
Be careful that someone’s body and hands are not trapped when closing the door.
If people must spend a longer time in the vehicle whilst it is very hot or cold outside, there is risk of injuries or danger to life. Do not lock the vehicle from the outside when there are people in it.
Do not frequently repeat opening and closing of doors, or apply excessive force to a door whilst the door closer is operating.