Blind-Spot Collision Warning settings
Setting features
Blind-Spot Safety
With the ENGINE START/STOP button in the ON position, select or deselect “User Settings (LCD display) or Settings → Vehicle (Infotainment System screen) → Driver Assistance → Blind-Spot Safety” to set whether or not to use each function.
If ‘Warning Only’ is selected, Blind-Spot Collision Warning will warn the driver with a warning message, an audible warning depending on the collision risk levels.
When the engine is restarted with Blind-Spot Collision Warning off, the ‘Blind-Spot Safety System is Off’ message will appear on the cluster.
If you change the setting from ‘Off’ to ‘Warning Only’, the warning light on the outside rearview mirror will blink for three seconds.
In addition, if the engine is turned on, when Blind-Spot Collision Warning is set to ‘Warning Only’, the warning light on the outside rearview mirror will blink for three seconds.
-
If 'Warning Only' is selected, steering is not assisted.
-
If ‘Off’ is selected, the driver should always be aware of the surroundings and drive safely.
If the engine is restarted, Blind-Spot Collision Warning will maintain the last setting.
Warning Timing
With the ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning Timing’ from the “User Settings (LCD display) or Settings → Vehicle (Infotainment System screen)” to change the initial warning activation time for Blind-Spot Collision Warning.
When the vehicle is first delivered, Warning Timing is set to ‘Normal’. If you change the Warning Timing, the warning time of other Driver Assistance functions may change.
Warning Volume
With the ENGINE START/STOP button in the ON position, select ‘Driver Assistance → Warning Volume’ from the “User Settings (LCD display) or Settings → Vehicle (Infotainment System screen)” to change the Warning Volume to ‘High’, ‘Medium’, ‘Low’ for Blind-Spot Collision Warning.
If you change the Warning Volume, the Warning Volume of other Driver Assistance functions may change.
-
The setting of the Warning Timing and Warning Volume applies to all functions of the Blind-Spot Collision Warning.
-
Even though ‘Normal’ is selected for Warning Timing, if a vehicle approaches at high speed, warning may seem late.
-
Select ‘Late’ for Warning Timing when traffic is light and when driving speed is slow.
If your vehicle is equipped with additional Infotainment System, please scan the QR code in a separately supplied Car Infotainment System Quick Reference Guide.