Search by Title only
Home > Driving your vehicle > The Eco-coasting system > Eco-Coasting operation conditions

Eco-Coasting operation conditions

The Eco-Coasting system is activated when the accelerator pedal is depressed and released under the following conditions.

  • When the driving mode is ECO mode.

  • When driver acceleration is SMART ECO in SMART mode.

  • When the shift lever is in the D (Drive) position.

  • When Cruise Control/Smart Cruise Control is OFF.

  • If you do not step on the accelerator pedal and brake pedal.

  • When the vehicle speed is within the range of 55 km/h (35 mph) to 160 km/h (100 mph).

  • If the road gradient is within the range of -5% to +5%.

  • In SMART mode, if the distance between the vehicle ahead and the relative speed is within a certain range (if Smart Cruise Control is equipped)

* If the front radar for smart cruise system cannot operate normally, the inter-vehicle distance and relative speed condition are automatically ignored.

* The Eco-Coasting system works after the engine on, transmission warned up and engine sensor selfdiagnosis is completed after starting.

* Depending on the driving situation, Eco-Coasting operation may be temporarily delayed even if the above conditions are met.