Digital clock (For Type A cluster)
Whenever the battery terminals, or memory fuse are disconnected, you must reset the time.
When the ignition switch is in the ON position, the clock buttons operate as follows:
Never attempt to adjust the digital clock while the vehicle is moving.
This could result in loss of control, and an accident causing death, serious injury, or property damage.
-
HOUR:
Turn the knob to the left (H), will advance the time displayed by one hour.
-
MINUTE:
Turn the knob to the right (M), will advance the time displayed by one minute.
-
RESET:
To clear away minutes, press the knob with your finger. Then the clock will be set precisely on the hour.
For example, if the knob is pressed while the time is between 9:01 and 9:29, the display will be reset to 9:00.
9:01~9:29 → 9:00
9:30~9:59 →10:00
Do not turn the knob excessively to prevent knob damage.