Search by Title only
Home > Specifications & Consumer information > Capacities

Capacities

Lubricant

Volume

Classification

Engine oil*1, *2 (drain and refill)

(Diesel) 2.5 VGT

with DPF

7.4 L

(7.8 US qt.)

ACEA C2/C3*3

without DPF

ACEA B4*3

(Diesel) 2.7 VGT

2WD

6.4 L

(6.8 US qt.)

API Service CF-4 Above or ACEA B2/B3

4WD

6.8 L

(7.2 US qt.)

(Diesel) 3.0 VGT (1.4 Ton)

6.8 L

(7.2 US qt.)

Engine oil consumption

Normal driving condition

MAX. 1 L / 1500 km

-

Severe driving condition

MAX. 1 L /1000 km

-

Manual transmission fluid

(Diesel) 2.5 VGT

2.2 ~ 2.3 L (2.3 ~ 2.4 US qt.)

HK MTF (SK), HD MTF (SHELL) Kia GENUINE PARTS MTF SAE75W/85 (API GL-4)

(Diesel) 2.7 VGT/ (Diesel) 3.0 VGT

2.2 ~ 2.3 L (2.3 ~ 2.4 US qt.)

Automatic trans mission fluid

(Diesel) 2.7 VGT

10 L (10.57 US qt.)

APOLL OIL ATF RED- 1K, Kia Genuine ATF Fluid J

Transfer case fluid (if equipped)

1.2 L (1.27 US qt.)

HK MTF(SK), HD MTF(SHELL), Kia GENUINE PARTS MTF SAE 75W/85 (fill for-life), API SERVICE GL-4

Differential fluid

Axle maker :Hyundai Wia

(Diesel) 2.7 VGT

ALL (With LD, Without LD)

1.6 L (1.7 US qt.)

Differential Oil API Service GL-5 (SAE 90)

4WD Front

1.2 L (1.3 US qt.)

Axle maker : SeAH Besteel Corp.

(Diesel) 2.7 VGT

With LSD

1.3 L (1.4 US qt.)

LSD OIL API Service GL-5 (SAE 85W-90)

Without LSD

1.3 L (1.4 US qt.)

Differential Oil API Service GL-5 (SAE 90)

4WD Front

1.2 L (1.3 US qt.)

(Diesel) 3.0 VGT

ALL

1.6 L (1.7 US qt.)

STD OIL API Service GL-5 (SAE 90)

(Diesel) 2.5 VGT

ALL (With LD, Without LD)

1.6 L (1.7 US qt.)

(Diesel) 2.5 VGT

4WD Front

1.3 L ~ 1.4 L (1.4 ~1.5 US qt.)

Power steering fluid

1.1 L ~1.2 L (1.2 ~ 1.3 US qt.)

PSF-4

Coolant

(Diesel) 2.5 VGT

12.6 L (13.3 US qt.)

An Phosphate based ethylene glycol based coolant

(Diesel) 2.7 VGT

11.2 L (11.8 US qt.)

(Diesel) 3.0 VGT

11.4 L (12.0 US qt.)

Brake/clutch fluid*4 (if equipped)

0.35 L (0.37 US qt.)

SAE J1704 DOT4 LV, ISO4925 CLASS-6, FMVSS116 DOT-4 or DOT-3

Urea solution (if equipped)

14 L (14.8 US qt.)

ISO 22241 or DIN 70070

Fuel

(Diesel) 2.7 VGT/ (Diesel) 3.0 VGT

60 L (15.9 US gal)

-

(Diesel) 2.5 VGT

Double cab. 4WD

60 L (15.9 US gal)

Except Double cab. 4WD

65 L (17.2 US gal)
*1Refer to the recommended SAE viscosity numbers on the next page.
*2Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*3ACEA certificated engine oil must be used as service engine oil. Only in case that ACEA engine oil is not available, engine oil above API CJ-4 is allowed restrictively.
*4To maintain your vehicle`s best brake and ABS/ESC performance, use Kia genuine brake fluid or those of an equivalent standard brake fluid as in the specification.

Recommended SAE viscosity number

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (starting and oil flow). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.

NOTICE

Never add any additives to the engine oil. Engine oil additives can change the properties of engine oil and may cause serious engine failure.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

Temperature Range for SAE Viscosity Numbers

Temperature

°C

°F

Diesel engine oil

* 1. It is only for extreme cold area and to be restricted by driving condition and area.(Especially, not recommended for sustained high loaded and high speed operation.).